IBM Books

AIS V3.3 Protocol Config Ref Vol 2


Index

A B C D E F G H I J L M N O P R S T U V W
A
  • access-control
  • IPv6 monitoring command (1633)
  • accounting and node statistics (1215)
  • activate
  • APPN monitoring command (1275)
  • activate_new_config
  • APPN configuration command (1266)
  • add
  • AppleTalk Phase 2 configuration command (1314)
  • APPN configuration command (1248)
  • IPv6 configuration command (1601)
  • IPv6 update packet filter configuration command (1619)
  • NDP configuration command (1673)
  • OSI configuration command (1534)
  • RIP6 configuration command (1751)
  • VINES configuration command (1353)
  • Address Resolution Protocol (ARP)
  • VINES (1348)
  • addresses
  • OSI/DECnet V monitoring command (1552)
  • aping
  • APPN monitoring command (1277)
  • AppleTalk Control Protocol
  • for PPP (1302)
  • AppleTalk Phase 2
  • basic configuration procedures (1298), (1305)
  • configuring (1297)
  • monitoring (1308)
  • network parameters (1300), (1306)
  • router parameters (1299)
  • AppleTalk Phase 2 configuration commands
  • add (1313)
  • delete (1315)
  • disable (1317)
  • enable (1319)
  • list (1321)
  • set (1323)
  • AppleTalk Phase 2 monitoring commands
  • atecho (1325)
  • cache (1327)
  • clear counters (1329)
  • counters (1330)
  • dump (1332)
  • interface (1334)
  • APPN
  • monitoring (1269)
  • APPN (DLSw) (1195)
  • APPN configuration commands
  • activate_new_config (1265)
  • add (1247)
  • delete (1261)
  • enable/disable (1239)
  • list (1263)
  • set (1242)
  • TN3270 (1238)
  • APPN Frame Relay BAN Connection Network (1221), (1255), (1256)
  • APPN monitoring commands
  • accessing (1271)
  • activate (1274)
  • aping (1276)
  • deactivate (1278)
  • dump (1280)
  • list (1282)
  • memory (1284)
  • restart (1286)
  • stop (1288)
  • summary (1273)
  • test (1290)
  • tn3270e (1292)
  • transmit (1295)
  • atecho
  • AppleTalk Phase 2 monitoring command (1326)
  • B
  • before you configure (1207)
  • Border Node
  • COS mapping table (1260)
  • routing list (1259)
  • Branch Extender (1155), (1158), (1196), (1249), (1250) , (1251), (1252), (1253), (1254), (1258)
  • C
  • cache
  • AppleTalk Phase 2 monitoring command (1328)
  • IPv6 monitoring command (1635)
  • change
  • IPv6 configuration command (1603)
  • IPv6 update packet filter configuration command (1621)
  • NDP configuration command (1675)
  • RIP6 configuration command (1753)
  • change metric
  • OSI/DECnet V monitoring command (1554)
  • change prefix-address (1537)
  • clear (1539)
  • PIM monitoring command (1719)
  • Client IP Address to LU Name Mapping (1181)
  • CLNP protocol (1465)
  • clnp-Stats
  • OSI/DECnet V monitoring command (1556)
  • command summary
  • DNA IV (1412)
  • configurable Held Alert Queue (1169), (1206), (1246)
  • configuration changes, affect on the router (1191)
  • configuration options (1192)
  • configuration requirements (1193)
  • connection networks (1154)
  • COS (1210)
  • COS mapping table (1200)
  • counters
  • AppleTalk Phase 2 monitoring command (1331)
  • IPv6 monitoring command (1637)
  • VINES monitoring command (1369)
  • D
  • DDD LU
  • TN3270E Server and (1185)
  • DDDLU (1172)
  • deactivate
  • APPN monitoring command (1279)
  • DECnet NCP
  • See NCP (1378)
  • delete
  • AppleTalk Phase 2 configuration command (1316)
  • APPN configuration command (1262)
  • IPv6 configuration command (1605)
  • IPv6 update packet filter configuration command (1623)
  • NDP configuration command (1677)
  • OSI configuration command (1541)
  • PIM configuration command (1703)
  • RIP6 configuration command (1755)
  • VINES configuration command (1354)
  • dhcpv6-relay
  • NDP monitoring command (1691)
  • Dial on Demand (1229)
  • APPN using (1228)
  • Digital Network Architecture (DNA) phase IV (1377)
  • disable
  • AppleTalk Phase 2 configuration command (1318)
  • APPN configuration command (1241)
  • IPv6 configuration command (1607)
  • NDP configuration command (1679)
  • OSI configuration command (1543)
  • PIM configuration command (1705)
  • RIP6 configuration command (1757)
  • VINES configuration command (1355)
  • DLUR (1151), (1152), (1203), (1204), (1217)
  • DLUR retry algorithm (1218)
  • DNA IV
  • access control
  • configuring (1400)
  • exclusive (1402)
  • inclusive (1401)
  • managing traffic (1399)
  • addressing
  • 802.5 Token (1388)
  • description (1386)
  • Ethernet data link (1387)
  • area routers
  • description (1393)
  • level 1 (1394)
  • level 2 (1395)
  • area routing filters (1403)
  • area support of (1380)
  • blending domains (1404)
  • configuration
  • for X.25 (1407)
  • designated router for (1391)
  • LAT protocol (1383)
  • MOP support of (1381)
  • Network Control Program (NCP) (1397)
  • See NCP (1379)
  • routing (1389), (1390)
  • routing parameters (1396)
  • routing tables (1392)
  • special considerations and limitations (1384)
  • terminology and concepts (1385)
  • DNA IV configuration commands
  • define
  • circuit (1415)
  • executor (1417)
  • module access (1419)
  • module routing (1421)
  • node (1423)
  • help (1413)
  • purge
  • module access (1427)
  • module routing (1429)
  • show
  • area (1435)
  • node (1437)
  • show/list
  • circuit (1441)
  • executor (1443)
  • module access (1445)
  • module routing (1447)
  • zero
  • circuit (1453)
  • executor (1455)
  • module access (1451), (1457)
  • DNA IV monitoring commands
  • define
  • circuit (1416)
  • executor (1418)
  • module access (1420)
  • module routing (1422)
  • node (1424)
  • help (1414)
  • purge
  • module access (1428)
  • module routing (1430)
  • show
  • area (1436)
  • node (1438)
  • show/list
  • circuit (1442)
  • executor (1444)
  • module access (1446)
  • routing (1448)
  • zero
  • circuit (1454)
  • executor (1456)
  • module access (1458)
  • module_access (1452)
  • DNA V
  • networks (1405)
  • X.25 configuration
  • Count 2 (1406)
  • DNAV-info
  • OSI/DECnet V monitoring command (1560)
  • dump
  • AppleTalk Phase 2 monitoring command (1333)
  • APPN monitoring command (1281)
  • IPv6 monitoring command (1639)
  • NDP monitoring command (1693)
  • PIM monitoring command (1717)
  • RIP6 monitoring command (1771)
  • VINES (1371)
  • Dynamic Definition of Dependent LUs (1171)
  • host-initiated (1173), (1187)
  • TN3270E Server and (1184)
  • TN3270E Server and host-initiated (1186)
  • E
  • enable
  • AppleTalk Phase 2 configuration command (1320)
  • APPN configuration command (1240)
  • IPv6 configuration command (1609)
  • NDP configuration command (1681)
  • OSI configuration command (1545)
  • PIM configuration command (1707)
  • RIP6 configuration command (1759)
  • VINES configuration command (1358)
  • Enterprise Extender Support for HPR over IP (1189)
  • es-adjacencies
  • OSI/DECnet V monitoring command (1562)
  • ES-IS protocol (1463)
  • description (1526)
  • hello message (1527)
  • es-is-stats
  • OSI/DECnet V monitoring command (1564)
  • exit (1311)
  • console command (1312)
  • VINES monitoring command (1375)
  • Extended Border Node (1156), (1159)
  • configuring (1197)
  • COS mapping table (1201)
  • network requirements (1157)
  • routing list (1199)
  • F
  • features
  • IP version 6 (IPv6) (1593)
  • focal point (1163), (1205)
  • G
  • getting help (1309)
  • H
  • help
  • console command (1310)
  • How LUs are chosen for client connections (1183)
  • HPR (1150), (1202)
  • I
  • implementation on the router (1148)
  • implicit focal point (1170), (1257)
  • interface
  • AppleTalk Phase 2 monitoring command (1335)
  • IPv6 monitoring command (1641)
  • PIM monitoring command (1721)
  • intermediate session data, collecting (1216)
  • internal
  • IPv6 monitoring command (1643)
  • IP
  • packet size (1780)
  • IPv6
  • configuring (1596)
  • overview (1595)
  • using (1594)
  • ipv6 command (1598)
  • IPv6 configuration commands
  • add (1600)
  • change (1602)
  • delete (1604)
  • disable (1606)
  • enable (1608)
  • list (1610)
  • move (1612)
  • set (1614)
  • summary (1599)
  • update (1616)
  • IPv6 monitoring commands
  • access-control (1632)
  • accessing (1628)
  • cache (1634)
  • counters (1636)
  • dump (1638)
  • interface (1640)
  • internal (1642)
  • mcast (1644)
  • mld (1646)
  • packet-filter (1658)
  • path-mtu (1660)
  • ping6 (1662)
  • reset (1648)
  • route (1650)
  • sizes (1652)
  • sniffer (1654)
  • static (1656)
  • summary of (1630)
  • traceroute (1742)
  • traceroute6 (1664)
  • tunnels (1666)
  • IPv6 update packet filter configuration commands
  • add (1618)
  • change (1620)
  • delete (1622)
  • list (1626)
  • move (1624)
  • is-adjacencies
  • OSI/DECnet V monitoring command (1566)
  • IS-IS messages
  • IS to IS hello (IIH) messages (1486)
  • point-to-point (1492)
  • IS-IS protocol
  • description (1480)
  • IS to IS Hello (IIH) messages
  • IS to IS hello (IIH) messages
  • L1 (1489)
  • L2 (1491)
  • IS-IS areas (1481)
  • IS-IS domain (1484)
  • overview (1464)
  • is-is-stats
  • OSI/DECnet V monitoring command (1568)
  • ISDN Permanent Circuit
  • APPN using (1226)
  • ISDN permanent connection (1227)
  • J
  • join
  • PIM monitoring command (1723)
  • L
  • l1-routes
  • OSI/DECnet V monitoring command (1570)
  • l1-Summary
  • OSI/DECnet V monitoring command (1574)
  • l1-Update
  • OSI/DECnet V monitoring command (1578)
  • l2-Routes
  • OSI/DECnet V monitoring command (1572)
  • l2-Summary
  • OSI/DECnet V monitoring command (1576)
  • l2-Update
  • OSI/DECnet V monitoring command (1580)
  • leave
  • PIM monitoring command (1725)
  • link level parameter lists (1223)
  • list
  • AppleTalk Phase 2 configuration command (1322)
  • APPN configuration command (1264)
  • APPN monitoring command (1283)
  • IPv6 configuration command (1611)
  • IPv6 update packet filter configuration command (1627)
  • NDP configuration command (1683)
  • NDP monitoring command (1695)
  • OSI configuration command (1547)
  • PIM configuration command (1709)
  • RIP6 configuration command (1761)
  • RIP6 monitoring command (1769)
  • VINES configuration command (1361)
  • Local Area Terminal (LAT) protocol (1382)
  • LU parameter list (1224)
  • LU Pooling (1177)
  • M
  • managing network nodes (1161)
  • managing the router network node (1160)
  • mcache
  • PIM monitoring command (1727)
  • mcast
  • IPv6 monitoring command (1645)
  • memory
  • APPN monitoring command (1285)
  • message units, supported, APPN-related alerts
  • mgroup
  • PIM monitoring command (1729)
  • mld
  • IPv6 monitoring command (1647)
  • monitoring
  • APPN (1270)
  • IPv6 monitoring commands (1631)
  • NDP monitoring commands (1689)
  • PIM monitoring commands (1715)
  • RIP6 monitoring commands (1767)
  • move
  • IPv6 configuration command (1613)
  • IPv6 update packet filter configuration command (1625)
  • mstats
  • PIM monitoring command (1731)
  • Multiple TN3270 ports (1179)
  • N
  • NCP
  • description of (1398)
  • NCP configuration commands
  • purge (1426)
  • set (1432)
  • show (1434)
  • show circuit (1440)
  • summary of (1408)
  • zero (1450)
  • NCP monitoring commands
  • purge (1425)
  • set (1431)
  • show (1433)
  • show circuit (1439)
  • summary of (1409)
  • zero (1449)
  • NDP
  • configuring (1668)
  • NDP command (1670)
  • NDP configuration commands
  • add (1672)
  • change (1674)
  • delete (1676)
  • disable (1678)
  • enable (1680)
  • list (1682)
  • set (1684)
  • summary (1671)
  • NDP monitoring commands
  • accessing (1686)
  • dhcpv6-relay (1690)
  • dump (1692)
  • list (1694)
  • ping6 (1696)
  • summary of (1688)
  • neighbor
  • PIM monitoring command (1733)
  • Network Control Protocols (NCP)
  • for PPP interfaces
  • AppleTalk Control Protocol (1304)
  • node level parameter lists (1225)
  • node tuning (1211)
  • node types (1147)
  • O
  • Open System Interconnection (OSI)
  • address prefix encoding (1515), (1516), (1518), (1520), (1522)
  • attached L2 IS routers (1507)
  • authentication passwords (1524)
  • designated IS (1495)
  • domain specific part (DSP) (1471)
  • end system (ES) (1459)
  • end system hello messages (1528)
  • ES-IS protocol (1525)
  • external routing (1514)
  • initial domain part (IDP) (1469)
  • description (1470), (1472)
  • intermediate system (IS) (1461)
  • internal routing (1513)
  • IS hello messages (1529)
  • IS to IS hello (IIH) messages (1487), (1493)
  • IS-IS addressing format (1473)
  • address format (1478)
  • AFI (1519)
  • area address (1475)
  • default address prefixes (1523)
  • fixed length IDI (1517)
  • non-pseudonode (1500), (1504)
  • point-to-point (1494)
  • pseudonode (1502), (1506)
  • selector (1477)
  • system ID (1476)
  • variable length IDI (1521)
  • IS-IS areas (1482)
  • IS-IS domain (1483)
  • L1 IIH message (1488)
  • L1 link state updates (1499), (1501)
  • L1 routing (1510)
  • L2 IIH messages (1490)
  • L2 link state updates (1503), (1505)
  • L2 routing (1511)
  • link state databases (1497)
  • link state updates (1498)
  • multicast addresses (1479)
  • network address structure (1468)
  • network addresses (1467)
  • Network Entity Title (NET) (1474)
  • network protocol data units (NPDU) (1460)
  • NSAP addressing (1466)
  • protocols running under (1462)
  • pseudonode (1496)
  • routing metric (1512)
  • routing tables (1509)
  • synonymous areas (1485)
  • unattached L2 IS routers (1508)
  • optional features (1149)
  • OSI
  • configuring (1530)
  • X.25 over OSI (1535)
  • OSI configuration commands
  • add (1533)
  • change prefix address (1536)
  • clear (1538)
  • delete (1540)
  • disable (1542)
  • enable (1544)
  • list (1546)
  • set (1548)
  • summary of (1532)
  • OSI/DECnet V
  • monitoring (1531)
  • OSI/DECnet V monitoring commands
  • addresses (1551)
  • change metric (1553)
  • clnp-stats (1555)
  • designated-router (1557)
  • DNAV-info (1559)
  • es-adjacencies (1561)
  • es-is-stats (1563)
  • is-adjacencies (1565)
  • is-is-stats (1567)
  • l1-routes (1569)
  • l1-summary (1573)
  • l1-update (1577)
  • l2-routes (1571)
  • l2-summary (1575)
  • l2-update (1579)
  • OSI/DECnet V monitoring command (1558)
  • ping-1139 (1581)
  • route (1583)
  • send (echo packet) (1585)
  • subnets (1587)
  • summary of (1550)
  • toggle (alias/no alias) (1589)
  • traceroute (1591)
  • P
  • packet size (1778)
  • packet-filter
  • IPv6 monitoring command (1659)
  • path-mtu
  • IPv6 monitoring command (1661)
  • PIM
  • pim
  • configuring (1698)
  • PIM monitoring command (1735)
  • PIM command (1700)
  • PIM configuration commands
  • delete (1702)
  • disable (1704)
  • enable (1706)
  • list (1708)
  • set (1710)
  • summary (1701)
  • PIM monitoring commands
  • accessing (1712)
  • clear (1718)
  • dump (1716)
  • interface (1720)
  • join (1722)
  • leave (1724)
  • mcache (1726)
  • mgroup (1728)
  • mstats (1730)
  • neighbor (1732)
  • pim (1734)
  • ping (1738)
  • summary of (1714)
  • summary pim (1736)
  • variables (1744)
  • ping
  • PIM monitoring command (1739)
  • ping-1139
  • OSI/DECnet V monitoring command (1582)
  • ping6
  • IPv6 monitoring command (1663)
  • NDP monitoring command (1697)
  • RIP6 monitoring command (1773)
  • Point-to-Point Protocol (PPP)
  • AppleTalk Control Protocol (1303)
  • port level parameter lists (1222)
  • port types supported (1190)
  • protocols
  • Digital Network Architecture (DNA) Phase IV (1376)
  • R
  • reset
  • IPv6 monitoring command (1649)
  • RIP6 monitoring command (1741), (1775)
  • restart
  • APPN monitoring command (1287)
  • restrictions (1219)
  • RIP6
  • configuring (1746)
  • RIP6 command (1748)
  • RIP6 configuration commands
  • add (1750)
  • change (1752)
  • delete (1754)
  • disable (1756)
  • enable (1758)
  • list (1760)
  • set (1762)
  • summary (1749)
  • RIP6 monitoring commands
  • accessing (1764)
  • dump (1770)
  • list (1768)
  • ping6 (1772)
  • reset (1740), (1774)
  • summary of (1766)
  • traceroute6 (1776)
  • route
  • IPv6 monitoring command (1651)
  • OSI/DECnet V monitoring command (1584)
  • routing list (1198)
  • RU size (1212), (1244), (1245)
  • S
  • SDLC (1235)
  • APPN using (1234)
  • Seed router
  • AppleTalk Phase 2 (1301), (1307)
  • send (Echo Packet)
  • OSI/DECnet V monitoring command (1586)
  • set
  • AppleTalk Phase 2 configuration command (1324)
  • APPN configuration command (1243)
  • IPv6 configuration command (1615)
  • NDP configuration command (1685)
  • OSI configuration command (1549)
  • PIM configuration command (1711)
  • RIP6 configuration command (1763)
  • VINES configuration command (1363)
  • sizes
  • IPv6 monitoring command (1653)
  • sniffer
  • IPv6 monitoring command (1655)
  • SNMP managed node, using the router as (1167)
  • sphere of control (1164)
  • static
  • IPv6 monitoring command (1657)
  • stop
  • APPN monitoring command (1289)
  • subnets
  • OSI/DECnet V monitoring command (1588)
  • summary of
  • NCP configuration commands (1410)
  • NCP monitoring commands (1411)
  • summary pim
  • PIM monitoring command (1737)
  • supported message units (1165)
  • supported message units, APPN-related alerts (1166)
  • T
  • talk
  • OPCON command (1272), (1597), (1629), (1669), (1687) , (1699), (1713), (1747), (1765)
  • test
  • APPN monitoring command (1291)
  • TG characteristics (1209)
  • the router as entry point (1162)
  • TN3270 gateway function (1175)
  • tn3270e
  • APPN monitoring command (1293)
  • TN3270E Server (1174), (1188), (1194)
  • Client IP Address to LU Name Mapping (1180)
  • configuration commands (1267)
  • Configuration parameters (1268)
  • Configuring, using DLUR (1236)
  • Configuring, using local node identifier (1237)
  • How LUs are chosen for client connections (1182)
  • LU Pooling (1176)
  • monitoring commands (1294)
  • Multiple TN3270 ports (1178)
  • toggle (Alias/No Alias)
  • OSI/DECnet V monitoring command (1590)
  • Token-Ring 4/16
  • packet size (1779)
  • topology Database Garbage Collection (1168)
  • traceroute
  • IPv6 monitoring command (1743)
  • OSI/DECnet V monitoring command (1592)
  • traceroute6
  • IPv6 monitoring command (1665)
  • RIP6 monitoring command (1777)
  • traces (1213)
  • tracing (1214)
  • transmission group characteristics, setting (1208)
  • transmit
  • APPN monitoring command (1296)
  • transporting data (1220)
  • tunnels
  • IPv6 monitoring command (1667)
  • U
  • update
  • IPv6 configuration command (1617)
  • using the router as SNMP managed node
  • V
  • V.25 bis (1233)
  • V.25bis
  • APPN using (1232)
  • variables
  • PIM monitoring command (1745)
  • VINES (1362)
  • Address Resolution Protocol (ARP) (1349)
  • basic configuration procedures (1350)
  • client nodes (1339)
  • configuring (1336)
  • disabling an interface (1356)
  • disabling globally (1357)
  • enabling an interface (1359)
  • enabling globally (1360)
  • monitoring (1351)
  • monitoring commands (1367)
  • neighbor tables (1344)
  • dumping (1372)
  • setting size (1366)
  • network layer protocols (1340)
  • Address Resolution Protocol (ARP) (1347)
  • Internet Control Protocol (ICP) (1346)
  • Routing Update Protocol (RTP) (1342)
  • VINES IP (1341)
  • overview (1337)
  • routing tables (1343)
  • dumping (1373)
  • setting size (1365)
  • RTP implementation (1345)
  • service nodes (1338)
  • setting number of client nodes (1364)
  • VINES configuration commands (1352)
  • VINES monitoring commands
  • counters (1368)
  • dump (1370)
  • exit (1374)
  • VTAM DSPU (1153)
  • W
  • WAN reroute (1230)
  • WAN restoral (1231)

  • [ Top of Page | Previous Page | Table of Contents | Index ]